easiMARK Colourprint Premier Blockout
Central UK Location
Daily deliveries throughout
the UK and Europe
Heat seal transfer film for use with solvent and eco solvent printers such as the Roland Versacamm. For application onto 100% sublimated polyester (e.g. sportswear).
- Prevents ink migration on sublimated polyester
- Durable prints
- Supplied by the metre at 500mm and 750mm wide
- Print & cut
How to use:
- Print and cut the material, weeding away the excess garment film. Blade: new at 45 degrees, pressure: 80gf, speed: 20 cm/sec.
- Remove the print from the polyester backing using an application tape (we recommend EMATAPEC).
- Heat apply sealable side down at 130 degrees C for 15 seconds, medium pressure.
- Remove application tape hot (should you use other application tapes, always follow the manufacturer's instructions).
Care instructions:
- Wash up to 40 degrees C
- Do not dry clean
- Do not tumble dry
- Iron on reverse
Please wait 24 hours after pressing before washing and do not use bleach or other aggressive chemical agents.
FAQ
Our Colourprint Premier Blockout is available in 500mm and 750mm
How big is each roll of printable blockout garment film?
The Colour print Premier Blockout is rated as compatible with Eco solvent, Solvent ink and HP latex inks.
Colour print Premier Blockout should be cut at 20cm/second with a 45° blade and 80gf.
Once weeded, this should be pressed for 15 seconds at 130° C under a medium pressure.
Colour print Premier Blockout printed garments can be washed up to 40°C (inside out) and can be ironed on the reverse. It is not suitable for tumble drying or dry cleaning
The colour print Premier Blockout is available in matt.
Our colour print Premier Blockout is certified Vegan OK, REACH Compliant, and OEKO-TEX Standard 100 Class 1.
