Fedrigoni F-Wrap Ultimate 1000 Series Vehicle Wrap

In stock

As low as £20.40 £17.00

Be the first to review this product

Central UK Location

Daily deliveries throughout
the UK and Europe

Skip to the end of the images gallery

Skip to the beginning of the images gallery

F-Wrap Ultimate 1000 Series is a premium multi-layer cast vinyl engineered for vehicle wrapping applications. Available in gloss, satin, and matte finishes, it offers superior conformability, allowing seamless application over complex 3D surfaces including rivets, concave, and convex areas.

The Slide & Tack adhesive system features low initial tack during the first minutes of installation - even after squeegeeing - allowing easy positioning, sliding, and repositioning of the film. Trapped air bubbles can be effortlessly removed with pressure, as air escapes through the micro-structured adhesive layer for a smooth, flawless finish.

With Fedrigoni F-Wrap Ultimate 1000 Series Vehicle Wrap, there is no need for lamination film and it can be applied directly to the surface of the vehicle.

Up to 12 years expected durability (black and white).

REACH and RoHS compliant.

Typical use for Fedrigoni F-Wrap Ultimate 1000 Series Vehicle Wrap

Fleet wrapping
Vehicle customisation
Boat wrapping (above the water line)

Details

CONSTRUCTION OF FEDRIGONI F-WRAP ULTIMATE 1000 SERIES VEHICLE WRAP

Face film: 90 μm multi-layer premium cast vinyl (120 to 140μm for structured)
Adhesive: repositionable transparent/grey solvent-based acrylic
Release liner: Slide & Tack, micro-embossed PE coated kraft paper 140 g/m²

Products:

F-Wrap Ultimate 1000: Gloss colours
F-Wrap Ultimate 1100: Gloss Metallic
F-Wrap Ultimate 1200: Matt colours
F-Wrap Ultimate 1300: Matt Metallic
F-Wrap Ultimate 1400: Satin colours
F-Wrap Ultimate 1500: Satin Metallic
F-Wrap Ultimate 1800: structured

CONVERTING METHOD FOR F-WRAP ULTIMATE 1000

No need of lamination film, can directly be applied on vehicle surface.

F-WRAP ULTIMATE 1000 APPLICATION METHOD / INSTRUCTIONS FOR USE

Only suitable for dry application on clean and degreased surfaces at temperature above 15°c, ideally at 20°c. The vinyl needs to be heated at 35-40°c before being conformed to 3D areas.

During application onto these 3D areas, considerable tension will be introduced in the material which is essential to release. This tension will be released by post-heating the material to 90°c. Without this stabilisation, the vinyl may pop-out of the recesses later.

Adhesion build-up curve is low under 15°c. In wintertime, the wrapped car needs to remain inside premises at 20°c for 24 hours. If the car needs to be released outside earlier, we recommend to first warm-up all film surfaces to 35 - 40°c before moving the car outside.

SHELF LIFE of FEDRIGONI F-WRAP ULTIMATE 1000

Shelf life is 2 years, when stored at 23 °C and 50 % relative humidity conditions.

Higher temperatures and/or humidity levels will reduce product shelf life.

EXPECTED DURABILITY OF F-Wrap Ultimate 1000

	Vertical			Non-vertical/Horizontal
Products	Zone 1	Zone 2	Zone 3	Zone 1	Zone 2	Zone 3
Black and white	12 years	8 years	6 years	6 years	4 years	2 years
Flat colours	8 years	5 years	3 years	4 years	2.5 years	1 year
Metallic colours	5 years	3 years	2 years	2.5 years	1.5 year	6 months

Application on Watercrafts: Above data decreased by 30%.

This information is based on real life experience and artificial aging according to ISO 4892-2.

Note: Exposure to severe temperature and ultra-violet light will cause a quicker deterioration. This applies also to polluted area, high altitude, horizontal applications, and south-facing exposure in north hemisphere.

Product Information