Avery DOL 1480 Matt 3D Cast Lamination Film 1370mm
Central UK Location
Daily deliveries throughout
the UK and Europe
A 30 micron matt clear super conformable cast overlaminate. UV stable with a permanent acrylic adhesive
50 metres on a full roll.
A 30 micron matt clear super conformable cast overlaminate. UV stable with a permanent acrylic adhesive
- Ultra conformable with excellent deep recess and concave performance in combination with our Ultimate Cast films
- Suitable for use in recesses with MPI 1005 SC Easy Apply RS
- Provides maximum UV and weathering protection with added abrasion and chemical resistance to printed graphics
- Superior smooth low glare matte finish
- Brilliant transparency for bright, vivid images
- Dimensionally stable mottle reduction PET liner for easy converting
- Improves solvent and UV curable inkjet outdoor image durability up to 5 years
FAQ
Laminating your vehicle wrap or signage will help it to stand the test of time. Laminating your print protects it from general weathering, as well as UV radiation; which can remove the colour from inks when exposed for long durations of time.
Avery DOL 1480z Matt Cast Laminate film should be stored at a temperature of around 20°C (+/- 2°C) with a room humidity between 45 - 55%.
Avery DOL 1460z Cast Lamination Film has a shelf life of 2 years.
Avery DOL 1480Z cast laminate is 30-micron clear cast vinyl overlaminate, 50 microns thick including the adhesive backing.
Avery DOL 1480z Cast Laminate can be applied to flat and slightly 3D surfaces at a temperature of 20°C. However, with more intricate surfaces, that are convex or concave; the applied temperature should be in the range between 45°C and 55°C.
Avery DOL 1480z Matt Cast Lamination film is rated to perform correctly at temperatures between - 40 °C to + 80 °C.
Product Specification
Download a full product specification here
